YearMakeModelTrimEngine

Bild 1 von 22

Ähnlichen Artikel verkaufen?

Selbst verkaufen

Front License Plate Tag Holder Mounting Adapter Bumper Kit Bracket for UD Trucks

2 SCREWS 4 BOLTS & 2 BUILT IN NUTS

eaccessoriesusa

(112135)

Mehr Artikel des Verkäufers

Verkäufer kontaktieren

US $5,95

Ca.EUR 5,11

Artikelzustand:

Neu

Stückzahl:

2 verfügbar1 verkauft

Ganz entspannt. Rückgaben akzeptiert.

Schnell, bevor er weg ist. 1 Person beobachtet diesen Artikel.

Versand:

US $2,95 (ca. EUR 2,53) USPS First Class®.

Standort: Englishtown, New Jersey, USA

Lieferung:

Lieferung zwischen Mi, 13. Aug und Di, 19. Aug nach 94104 bei heutigem Zahlungseingang

Rücknahme:

30 Tage Rückgabe. Käufer zahlt Rückversand. Wenn Sie ein eBay-Versandetikett verwenden, werden die Kosten dafür von Ihrer Rückerstattung abgezogen.

Zahlungen:

Sicher einkaufen

eBay-Käuferschutz

Geld zurück, wenn etwas mit diesem Artikel nicht stimmt. Mehr erfahreneBay-Käuferschutz - wird in neuem Fenster oder Tab geöffnet

Der Verkäufer ist für dieses Angebot verantwortlich.

eBay-Artikelnr.:276793495847

Zuletzt aktualisiert am 26. Dez. 2024 19:37:00 MEZAlle Änderungen ansehenAlle Änderungen ansehen

Kompatibilität

Teil ist kompatibel mit 417 Fahrzeug(en)

Year	Make	Model	Trim	Engine	Notes
2013	UD	1800	Base	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2013	UD	2000	Base	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2013	UD	2000	Base Straight Truck - Low Tilt	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2013	UD	2300DH	Base	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2013	UD	2300DH	Base Straight Truck - Low Tilt	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2013	UD	2300LP	Base	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2013	UD	2300LP	Base Straight Truck - Low Tilt	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2013	UD	2600	Base	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2013	UD	2600	Base Straight Truck - Low Tilt	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2013	UD	3300	Base	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2013	UD	3300	Base Straight Truck - Low Tilt	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2012	UD	1800	Base	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2012	UD	1800	Base Straight Truck - Low Tilt	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2012	UD	2000	Base	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2012	UD	2000	Base Straight Truck - Low Tilt	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2012	UD	2300DH	Base	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2012	UD	2300DH	Base Straight Truck - Low Tilt	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2012	UD	2300LP	Base	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2012	UD	2300LP	Base Straight Truck - Low Tilt	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!
2012	UD	2600	Base	7.0L 7013CC 427Cu. In. l6 DIESEL Turbocharged	This bracket will fit for ALL FLAT SHAPE OF THE BUMPERS! Bracket Will NOT work on the Curved Spot of the Bumper or V-shaped Bumpers. You can also mount it on the left or right side of the bumper. BRACKET has SIZE-(2.5" x 12"). Will work for all US, CANADA & MEXICO license plates! Will NOT fit for EUROPEAN license plates. May require new holes in the bumper. Try to use original screws if holes are already present!

Einige der in dieser Tabelle aufgeführten Informationen wurden bereitgestellt von eaccessoriesusa

Artikelmerkmale

Artikelzustand: Neu

Items Included: Bolts, Mounting Hardware, Screws

Placement on Vehicle: Front, Left, Lower, Right, Upper, Middle, Center, Bumper

Features: Mounting Hardware Included, Easy Installation

Finish: Plastic

Performance Part: No

Other Part Number: LICENSE PLATE TAG HOLDER MOUNT ADAPTER BRACKET

Compatibility 1: Fits all Car Brands with Flat Shape of the Bumpers

Color: Black

Fitment Type: Direct Replacement

Manufacturer Part Number: USLPB

Holes 1: Use your vehicle's original screws if holes are already present.

Dimensions: W 2.5 inch L 12 inch

Quantity: One (1) License Plate Bracket

Material: ABS Plastic, ABS, Plastic

Superseded Part Number: Mounting, license plate accessories

Vintage Part: No

Brand: Sold by eAccessoriesUsa

Type: License Plate Tag Frame Mount Bracket

Interchange Part Number: LICENSE PLATE TAG HOLDER MOUNT ADAPTER BRACKET, Soporte de matrícula, BRAND NEW, genuine oem style grade bumper vanity, vanity replacement frame grille tag, license plate accessories, 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012, 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025, 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21, 22 23 24 25, for UD U D 1800 2000 2300DH 2300LP 2600 3300, Base Straight Truck Low Tilt

Screws: Included: 2 SCREWS + 2 BOLTS + 2 ZIPPERS

Attachment Type: Bolt-On, Screw-On

Holes: May require new holes in the bumper

Won't fit for: European standard License Plates

Universal Fitment: Yes

Compatibility: Please read carefully my Description/Compatibility

Artikelbeschreibung des Verkäufers

Rechtliche Informationen des Verkäufers

Ich versichere, dass alle meine Verkaufsaktivitäten in Übereinstimmung mit allen geltenden Gesetzen und Vorschriften der EU erfolgen.

Info zu diesem Verkäufer

Mitglied seit Jul 2014

Antwortet meist innerhalb 24 Stunden

Angemeldet als gewerblicher Verkäufer

Shop besuchen Kontakt

Detaillierte Verkäuferbewertungen

Durchschnitt in den letzten 12 Monaten

Genaue Beschreibung

4.9

Angemessene Versandkosten

5.0

Lieferzeit

4.9

Kommunikation

5.0

WiresLicense Plate AccesoriesCargo NetsRear BracketsOBD2Cup Holdersbrsbrarbr

Verkäuferbewertungen (113.719)

t***6 (2595)- Bewertung vom Käufer.
Letzter Monat
Bestätigter Kauf
great seller great quality
7" Black Stainless Antenna Mast Power Radio AM/FM for CHEVY SILVERADO 2006-2024 (Nr. 274182261464)
v***v (1393)- Bewertung vom Käufer.
Letzter Monat
Bestätigter Kauf
This was needed to install a front plate on a XK8 because there are no typical mounting points on the front
Front License Plate Tag Holder Mounting Bumper Kit Bracket for Jaguar Brand New (Nr. 275074845460)
p***i (10)- Bewertung vom Käufer.
Letzter Monat
Bestätigter Kauf
Product was as described. Simple set up and quick shipping. Great communication as well.
Rear Trunk Envelope Style Mesh Cargo Net for TOYOTA CAMRY 2002-2011 Brand New (Nr. 272235410919)

Alle Bewertungen ansehen

Passende Teile finden

Wir benötigen weitere Informationen zu Ihrem Fahrzeug, um bestätigen zu können, dass das Teil passt.

Bild 1 von 22

Front License Plate Tag Holder Mounting Adapter Bumper Kit Bracket for UD Trucks

Sicher einkaufen

Kompatibilität

Artikelmerkmale

Artikelbeschreibung des Verkäufers

Rechtliche Informationen des Verkäufers

eaccessoriesusa

99,8% positive Bewertungen•514 Tsd. Artikel verkauft

Detaillierte Verkäuferbewertungen

Beliebte Kategorien in diesem Shop

Verkäuferbewertungen (113.719)

Noch mehr entdecken:

eaccessoriesusa

99,8% positive Bewertungen•514 Tsd. Artikel verkauft

Detaillierte Verkäuferbewertungen

Beliebte Kategorien in diesem Shop

Verkäuferbewertungen (113.719)